ATEX Enclosures | Hazardous Area Junction Boxes for Zone 1 & Zone 2

ATEX certified Enclosures in UAE, ATEX certified Enclosures in Dubai Abu Dhabi, ATEX certified Enclosures in Dubai, ATEX certified Enclosures in Sharjah, ATEX certified Enclosures in Abu Dhabi, ATEX certified Enclosures in UAE, ATEX certified Junction box in Abu Dhabi, ATEX certified Junction box in Sharjah, ATEX certified Junction box in Dubai, ATEX certified Junction box in UAE

We supply ATEX / IECEx approved Enclosures, Junction boxes in UAE.

Zone 1 & Zone 2 GRP Assembled Enclosures & Junction Boxes – ATEX Hazardous Area

ATEX Enclosures

Abtech BPGA GRP assembled electrical enclosures and junction boxes are ATEX certified and suitable for Zone 1 and Zone 2 hazardous areas.

Abtech BPGA enclosures comprise of three types of BPG enclosure in two different size – are ATEX and IECEx certified Ex‘e’ and are suitable for use in Category 2/Zone 1 & 21 and Category 3/Zone 2 & 22 areas according to EN 60079-14.

The Abtech BPGA GRP range of hazardous area enclosures intended for explosive atmospheres are manufactured in impact resistant glass-reinforced polyester which has an ingress protection rating of IP66/67.

The BPGA enclosures are ideal for a range of uses such as lighting, power and instrument junction boxes. ATEX certified Enclosures in UAE, ATEX certified Enclosures in Dubai Abu Dhabi, ATEX certified Enclosures in Dubai, ATEX certified Enclosures in Sharjah, ATEX certified Enclosures in Abu Dhabi, ATEX certified Enclosures in UAE, ATEX certified Junction box in Abu Dhabi, ATEX certified Junction box in Sharjah, ATEX certified Junction box in Dubai, ATEX certified Junction box in UAE

 

ATEX Enclosures & Junction Boxes

Zone 1 & Zone 2 Hazardous area

Features

Zone 1 Zone 2 Hazardous Area Junction Box Enclosures

Junction Boxes & Enclosures

  • Ingress protected to IP66/67
  • Shell/ERA deluge tested
  • Measuring between 50 and 100mm in diameter
  • Fitted with a brass M6 internal/external earth stud
  • ATEX & IECEx compliant Ex‘e’ for use in Zone 1, 21,2 & 22 areas
  • Pre-drilled with four M20 tapped cable entries
  • Supplied with certified blanking plugs

Temperature Rating

  • -50°C to +40°C at T6
  • -50°C to +55°C at T5

Zone 1

A hazardous area zone location according to ATEX in which an explosive atmosphere consisting of a mixture with air of flammable substances in the form of gas, vapour or mist is likely to occur in normal operation occasionally.

Zone 2

A hazardous area zone location according to ATEX in which an explosive atmosphere consisting of a mixture with air of flammable substances in the form of gas, vapour or mist is not likely to occur in normal operation but, if it does occur, persists for a short  period only.

ATEX Explained

The ATEX Directive consists of two EU directives describing the type of equipment and hazardous area location within a potentially explosive atmosphere. ATEX originates its name from the French title of the 94/9/EC directive: Appareils destinés à être utilisés en ATmosphères EXplosibles.

Cable entries can be drilled in the enclosure or junction box door, sides or via the cable gland plates – cable entries can also be drilled through the rear face of the stainless steel enclosure (EEx’e’ hazardous area versions).

The hazardous area enclosures include a hinged, lift-off door secured to the junction box using 4 captive stainless steel screws which also maintain the correct compression on the gasket. ATEX certified Enclosures in UAE, ATEX certified Enclosures in Dubai Abu Dhabi, ATEX certified Enclosures in Dubai, ATEX certified Enclosures in Sharjah, ATEX certified Enclosures in Abu Dhabi, ATEX certified Enclosures in UAE, ATEX certified Junction box in Abu Dhabi, ATEX certified Junction box in Sharjah, ATEX certified Junction box in Dubai, ATEX certified Junction box in UAE

 

Electrical Enclosure Junction Box

Zone 1 & Zone 2 GRP Assembled Enclosures & Junction Boxes - ATEX Hazardous Area

Zone 1 & Zone 2 GRP Assembled Enclosures & Junction Boxes – ATEX Hazardous Area

Hazardous Area Certification

Hazardous Area Enclosures: Intrinsically Safe Junction Boxes

Hazardous Area Enclosures: Intrinsically Safe Junction Boxes

Abtech BPGA enclosures are certified according to leading hazardous area classifications including:

  • ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
  • TR CU
  • NEMA 4X (CSA, UL & FM) Class 1 Division 2

ATEX certified Enclosures in UAE, ATEX certified Enclosures
in Dubai Abu Dhabi, ATEX certified Enclosures in Dubai, ATEX certified
Enclosures in Sharjah, ATEX certified Enclosures in Abu Dhabi, ATEX certified
Enclosures in UAE, ATEX certified Junction box in Abu Dhabi, ATEX certified
Junction box in Sharjah, ATEX certified Junction box in Dubai, ATEX certified
Junction box in UAE

For ATEX Certification or Training, click here
For IECEx Certification or Training, click here
For CompEx Certification, click here
For contacting us, click here

Our other Certification Services.

Share on facebook
Facebook
Share on google
Google+
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest