Products
-
- Led, Lighting
2 DCA Portable Torch
- The ATEX Safety Torch range offers the perfect answer for every Ex application, with reliable, simple and cost effective solutions.
- Read more
-
- Inspection lighting, Lighting
2 DCA Portable Torch
- The ATEX Safety Torch range offers the perfect answer for every Ex application, with reliable, simple and cost effective solutions.
- Read more
-
- Accessories, Fittings and adapters
Adapters Ex e, Ex d (Group I & II)
- Type of protection: II 2GD Ex e, Ex d, IIC I, category M2. Ambient Temp : -40°C÷+100°C with EPDM or Nylon gaskets -70°C÷+220°C with Silicone gaskets -70°C÷+400°C without gaskets. Zones : 1-2-21-22
- Read more
-
- Accessories, Cable Glands And Plugs
ADE 1F Cable gland
- Sealing in outer sheaths of cablesIndoor / outdoorA clamping device shall be appliedGroup Ii category 2 Equipment for Gas Explosive atmosphere in zones 1 and 2, for Dust explosive atmosphere in zone 21-22, on EExpII; EExeII; EExdIIA and EExdIIB apparatus without volume limitation, on EExdiiC apparatus of free internal volume lower or equal to 2000 cm3.
- Read more
-
- Accessories, Cable Glands And Plugs
ADE 4F Cable gland
- Sealing in outer sheaths of cables. Indoor / outdoor. A clamping device shall be applied Group Ii category 2 Equipment for Gas Explosive atmosphere in zones 1 and 2, for Dust explosive atmosphere in zone 21-22, on EExpII; EExeII; EExdIIA and EExdIIB apparatus without volume limitation, on EExdiiC apparatus of free internal volume lower or equal to 2000 cm3.
- Read more
-
- Accessories, Audible alarms
AP Loudspeakers series
- The loudspeakers series AP are produced with a cylindrical body and two different types of lid: flat or dome-shaped. In both cases the ABS horn is mechanically fitted on the end of the body. They come in two different sizes: the smallest (AP 6) can hold a magnetodynamic unit of 6W – 8Ω without a transformer while the biggest (AP…
- Read more
-
- Wifi Access Point
ARM-IO ATEX Modem Radio 868MHz
- ARM-IO Radio modem for hazardous area. Body in aluminium alloy IP66. This product may use for wireless return informations in industrial environments. Installation in ATEX zones 1, 2 for gas type IIC, 21 or 22 for dust.
- Read more
-
- Heating, HVAC
ATEX Electrical heater unit
- Type of protection: II2G, II2D, or II2GDClass of temperature: T3 or T4Protection degree: IP55Ambient Temp : -20/+40°CZones : 1-2-21-22
- Read more
-
- Led, Lighting
ATEX LED WORKLITE
- Two Worklite models are available, the WL-85 with a 12 LED lamp head, giving over 1000 lumens output, and the WL-70 with a 6 LED lamp head, giving over 500 lumens output. Both models deliver a piercing 30° beam, combined with a flood of lower level fringe light.
- Read more
-
- Inspection lighting, Lighting
ATEX LED WORKLITE
- Two Worklite models are available, the WL-85 with a 12 LED lamp head, giving over 1000 lumens output, and the WL-70 with a 6 LED lamp head, giving over 500 lumens output. Both models deliver a piercing 30° beam, combined with a flood of lower level fringe light.
- Read more
-
- Led, Lighting
ATEX Mini torch
- Thermoplastic resin body very resistant to shocks, (also to low temperature). Lens in polycarbonate for a best protection. These products are delivery with cells.
- Read more
-
- Inspection lighting, Lighting
ATEX Mini torch
- Thermoplastic resin body very resistant to shocks, (also to low temperature). Lens in polycarbonate for a best protection. These products are delivery with cells.
- Read more
-
- Limit switch, Sensors
ATEX Switch ZS 75 S
- Metal switch 2 or 4 contacts for zone 22 with a protection mode II 3D.
- Read more
-
- Led, Lighting
BAT53 250W ATEX Floodlight
- BAT53-250W series explosion-proof floodlights are designed for large area lighting in the oil field, offshore platform, dock or factory, etc, where is filled with IIA, IIB, explosive gas mixture.
- Read more
-
- HID, Lighting
BAT53 250W ATEX Floodlight
- BAT53-250W series explosion-proof floodlights are designed for large area lighting in the oil field, offshore platform, dock or factory, etc, where is filled with IIA, IIB, explosive gas mixture.
- Read more
-
- Led, Lighting
BAT53 400W ATEX Floodlight
- BAT53-400W series explosion-proof floodlights are designed for large area lighting in the oil field, offshore platform, dock or factory, etc, where is filled with IIA, IIB, explosive gas mixture.
- Read more
-
- HID, Lighting
BAT53 400W ATEX Floodlight
- BAT53-400W series explosion-proof floodlights are designed for large area lighting in the oil field, offshore platform, dock or factory, etc, where is filled with IIA, IIB, explosive gas mixture.
- Read more
-
- Led, Lighting
BAT86-160-120 ATEX LED Floodlight 120W
- Type of protection: Ex II2 G Ex d IIB T6-T5 Gb; Ex II2 D Ex tb IIIC T80° - T95°C Db IP66Class of temperature: T6-T5Protection degree: IP66Ambient Temp : -40/+40°C (T6) -40/+55°C (T5)Zones : 1-2-21-22
- Read more
-
- Led, Lighting
BAT86-160-160 ATEX LED Floodlight 160W
- Type of protection: Ex II2 G Ex d IIB T5-T4 Gb; Ex II2 D Ex tb IIIC T95°C – T130°C Db IP66Class of temperature: T5-T4Protection degree: IP66Ambient Temp : -40/+40°C (T5), -40/+55°C (T6)Zones : 1-2-21-22
- Read more
-
- Atex Battery Boxes
Battery box 24V – 40Ah C20
- Battery box application. Contain 1 x EXIDE SONNENSCHEIN A512/40 cells (approx. dimensions 270x200xH220mm). The battery box is manufactured in stainless steel AISI 316L with bolted on top plate, complete with 2 x stainless steel cable glands. Furniture of cable on request.
- Read more
-
- Atex Battery Boxes
Battery box 24V – 500Ah C1
- Battery box application. Contain 12 x FIAMM 2SLA500 cells (approx. external dimensions 1.200x850xH430mm). Battery box is manufactured in stainless steel AISI 316L with hinged lid. Position and size of cable glands to be discussed at design stage.
- Read more
-
- Atex Battery Boxes
Battery box A512/200 12V – 400Ah C20
- Battery box including 2x EXIDE SONNENSCHEIN A512/200 cells (approx. dimensions 700x660xH600mm). The battery box is manufactured in stainless steel AISI 316L with hinged top plate, complete with 2 x stainless steel cable glands.
- Read more
-
- Atex Battery Boxes
Battery box Exide A512/40 12V – 40Ah
- ATEX battery box 40Ah C20 12V ( 1x Exide A512/40 cell). Battery box in SS316L with bolted on lid (no hinges), Approx dim 300x250x200mm. Tamb -20°C + 50°C IP43 Cable gland to be defined.
- Read more
-
- Atex Battery Boxes
Battery box Exide Sonnenschein 24V 200Ah C20
- ATEX 2G Ex e Battery including 2 x EXIDE SONNENSCHIEN SOLAR S12/230 cells (approx. dimensions 610X610XH370mm). The battery box is manufactured in stainless steel AISI 316L with hinged lid. Position and size of cable entries to be discussed at design stage.
- Read more
-
- Atex Battery Boxes
Battery box FG20721 12V – 7.2Ah C20
- FG20721 12V 7.2Ah C20 is a general purpose application battery. Within the FG range FIAMM offer 6V and 12V monoblocs at various amp hour capacities enable the right battery selection for each requirement. FIAMM is a Manufacturer of VRLA battery and is supported by a dedicated sales network with market knowledge and experience of small sealed lead acid battery applications.
- Read more
-
- Atex Battery Boxes
Battery box FG20721 24V – 7.2Ah C20
- FG20721 24V 7.2Ah C20 is a general purpose application battery. Within the FG range FIAMM offer 6V and 12V monoblocs at various amp hour capacities enable the right battery selection for each requirement. FIAMM is a Manufacturer of VRLA battery and is supported by a dedicated sales network with market knowledge and experience of small sealed lead acid battery applications.
- Read more
-
- Atex Battery Boxes
Battery box FG21202 12V – 12Ah C20
- FG21202 12V 12Ah C20 is a general purpose application battery. Within the FG range Fiamm offer 6V and 12V monoblocs at various amp hour capacities enable the right battery selection for each requirement. FIAMM Sealed Power is a Manufacturer of VRLA batteries; and is supported by a dedicated sales network with market knowledge and experience of small sealed lead acid…
- Read more
-
- Atex Battery Boxes
Battery box FG21202 24V – 12Ah C20
- FG21202 24V 12Ah C20 is a general purpose application battery. Within the FG range Fiamm offer 6V and 12V monoblocs at various amp hour capacities enable the right battery selection for each requirement. FIAMM Sealed Power is a Manufacturer of VRLA batteries; and is supported by a dedicated sales network with market knowledge and experience of small sealed lead acid…
- Read more
-
- Atex Battery Boxes
Battery box FG21803 12V – 18Ah C20
- FG21803 12V 18Ah C20 is a general purpose application battery. Within the FG range Fiamm offer 6V and 12V monoblocs at various amp hour capacities enable the right battery selection for each requirement. FIAMM Sealed Power is a Manufacturer of VRLA batteries; and is supported by a dedicated sales network with market knowledge and experience of small sealed lead acid…
- Read more
-
- Atex Battery Boxes
Battery box FG21803 24V – 18Ah C20
- FG21803 24V 18Ah C20 is a general purpose application battery. Within the FG range Fiamm offer 6V and 12V monoblocs at various amp hour capacities enable the right battery selection for each requirement. FIAMM Sealed Power is a Manufacturer of VRLA batteries; and is supported by a dedicated sales network with market knowledge and experience of small sealed lead acid…
- Read more
-
- Atex Battery Boxes
Battery box Sunica plus NiCD 24V 100Ah C120
- Ex e Battery including 17 x SAFT SUN+100 NiCd cells (approx. external dimensions 490x450xH600mm. The battery box is manufactured in stainless steel AISI 316L with hinged lid. Position and size of cable entries to be discussed at design stage.
- Read more
-
- Led, Lighting
BAY51-D Lighting fixture Ex d
- BAY51 series fluorescent lamp is suitable for lighting in chemical, petrochemical factory and warehouse, for atmospheres II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Fluorescent, Lighting
BAY51-D Lighting fixture Ex d
- BAY51 series fluorescent lamp is suitable for lighting in chemical, petrochemical factory and warehouse, for atmospheres II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Uncategorized
BAY51-Q 2x18W. Fluorescent lamp
- BAY51-Q 2x18W series increased safety plastic light fittings for fluorescent lamp is usable for lighting in the chemical, petrochemical factory and warehouse, where is filled with II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Fluorescent, Lighting
BAY51-Q 2x18W. Fluorescent lamp
- BAY51-Q 2x18W series increased safety plastic light fittings for fluorescent lamp is usable for lighting in the chemical, petrochemical factory and warehouse, where is filled with II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Led, Lighting
BAY51-Q 2x36W. Fluorescent lamp
- BAY51-Q 2x36W series increased safety plastic light fittings for fluorescent lamp is usable for lighting in the chemical, petrochemical factory and warehouse, where is filled with II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Fluorescent, Lighting
BAY51-Q 2x36W. Fluorescent lamp
- BAY51-Q 2x36W series increased safety plastic light fittings for fluorescent lamp is usable for lighting in the chemical, petrochemical factory and warehouse, where is filled with II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Led, Lighting
BAY51-Q18 x 2XJ.Emergency lighting ATEX
- BAY51-Q18 x 2XJ series increased safety plastic light fittings for fluorescent lamp is usable for lighting in the chemical, petrochemical factory and warehouse, where is filled with II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Fluorescent, Lighting
BAY51-Q18 x 2XJ.Emergency lighting ATEX
- BAY51-Q18 x 2XJ series increased safety plastic light fittings for fluorescent lamp is usable for lighting in the chemical, petrochemical factory and warehouse, where is filled with II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Led, Lighting
BAY51-Q36 x 2XJ.Emergency lighting ATEX
- BAY51-Q36 x 2XJ series increased safety plastic light fittings for fluorescent lamp is usable for lighting in the chemical, petrochemical factory and warehouse, where is filled with II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Fluorescent, Lighting
BAY51-Q36 x 2XJ.Emergency lighting ATEX
- BAY51-Q36 x 2XJ series increased safety plastic light fittings for fluorescent lamp is usable for lighting in the chemical, petrochemical factory and warehouse, where is filled with II A,II B and II C explosive gas mixture and flammable.
- Read more
-
- Led, Lighting
BAYD-XF – Emergency EXIT light fitting
- BAYD-XF explosion-proof emmergency exit light fittings can be used for safety illumination but also an emergency sign lights in IIA, IIB, and IIC explosive gas atmosphere of the petroleum exploration and refinery, military storage and petrochemical factory.
- Read more
-
- Emergency exit light, Lighting
BAYD-XF – Emergency EXIT light fitting
- BAYD-XF explosion-proof emmergency exit light fittings can be used for safety illumination but also an emergency sign lights in IIA, IIB, and IIC explosive gas atmosphere of the petroleum exploration and refinery, military storage and petrochemical factory.
- Read more
-
- Atex Battery Boxes
BB_FG12V12A Battery box 12V 12Ah
- Battery box including a FIAMM battery FG21202 of 12V 12Ah. This battery is designed to respond to more or less long discharge regimes. Design of the AISI 316L stainless steel box with screwed lid on the underside. Supplied with cable gland and cable.
- Read more
-
- Atex Battery Boxes
BB_FG12V18A Battery box 12V 18Ah
- Battery box including a FIAMM battery FG20803 of 12V 18Ah. This battery is designed to respond to more or less long discharge regimes. Design of the AISI 316L stainless steel box with screwed lid on the underside. Supplied with cable gland and cable.
- Read more
-
- Atex Battery Boxes
BB_FG12V7A Battery box 12V 7.2Ah
- Battery box including a FIAMM battery FG20271 of 12V 7.2Ah. This battery is designed to respond to more or less long discharge regimes. Design of the AISI 316L stainless steel box with screwed lid on the underside. Supplied with cable gland and cable.
- Read more
-
- Atex Battery Boxes
BB_FG24V18A Battery box 24V 18Ah
- Battery box including two FIAMM batteries FG20803 of 12V 18Ah. This battery is designed to respond to more or less long discharge regimes. Design of the AISI 316L stainless steel box with screwed lid on the underside. Supplied with cable gland and cable.
- Read more
-
- Atex Battery Boxes
BB_FG24V27A Battery box 24V 27Ah
- Battery box including two FIAMM batteries FG22703 of 12V 27Ah. This battery is designed to respond to more or less long discharge regimes. Design of the AISI 316L stainless steel box with screwed lid on the underside. Supplied with cable gland and cable.
- Read more
-
- Air conditioning
BKF50/220EU Air Conditioner IEC Ex R410A
- For explosion-proof wall air conditioner, cooling system are available to meet different requirements of low, medium and high temperature zones worldwide.
- Read more
-
- Air conditioning
BKF71/220EU Air Conditioner IEC Ex R410A
- For explosion-proof wall air conditioner, cooling system are available to meet different requirements of low, medium and high temperature zones worldwide.
- Read more
-
- Air conditioning
BKFR50/220EU Air Conditioner heating IEC Ex R410A
- For explosion-proof wall air conditioner, heating system is available to meet different requirements of low, medium and high temperature zones worldwide.
- Read more
-
- Air conditioning
BKFR71/220EU Air Conditioner heating IEC Ex R410A
- For explosion-proof wall air conditioner, heating system is available to meet different requirements of low, medium and high temperature zones worldwide.
- Read more
-
- Enclosures, High voltage
BUS BAR Serie
- The Bus-Bar box is used for the connection of cables or equipment where the conductor size and number of cables being connected would make it very difficult in any other High Voltage range.
- Read more
-
- Enclosures, Increased safety enclosures Ex e
BXJ 8050 20/6D – Enclosure polyester
- Enclosure in glass fibre reinforced polyester resin Equipped with 6 hood type terminals. BXJ8050 can be used as connection and distribution box of various electric apparatus, also connection of self control and communication signal power in the circuit of voltage up to 220V/380V.
- Read more
-
- Enclosures, Increased safety enclosures Ex e
BXJ-S Stainless steel enclosure Ex e
- BXJ-S series enhanced safety corrosion-proof junction box. Explosion protection to CENELEC & IEC. Stainless steel enclosure, Protection degree IP66.
- Read more
-
- Enclosures, Flameproof ex d
CCA Enclosure IIC with screw cover
- The junction enclosures series CCA… are normally used for connection and junction of cable conduits. Enclosure in light alloy with screwed cover. External screws in stainless steel. RAL 2004 internal anti-condensate coating, RAL 7000 external epoxy coating with embossed effect. Ambient temperature up to +40°C. (on request: -50°C +80°C).
- Read more
-
- Enclosures, Flameproof ex d
CCF. Cast Iron enclosure
- CCF enclosures series consist of a rectangular body and a flat joint cover. The cover is secured to the box using Allen bolts (TCEI UNI 5931 cl. 8.8) The box is equipped with: small feet, protruding from the body, that can be used to secure the unit, (all but CCF 0R on which they are applied by request), and internal…
- Read more
-
- Wifi Access Point
CCF12AMS12024 Enclosure MERAKI Switch 24 ports
- DatasheetDownload ATEX / IECEx enclosure with MS120 MERAKI switch technology. 24 ports model.
- Read more
-
- Wifi Access Point
CCF12AMS12048 Enclosure MERAKI Switch 48 ports
- DatasheetDownload ATEX / IECEx enclosure with MS120 MERAKI switch technology. 48 ports model.
- Read more
-
- Wifi Access Point
CCF1GCTM1500A – GPS Passive antenna enclosure
- ATEX antenna GPS 1,575.42MHz for gas zones (1 & 2). Lightweight and compact, body in aluminum, antenna in nickel plated brass. Unarmoured cable gland M20 kit in nickel plated brass (seals 5.5/8 - 8/10.5 - 10.5/13mm). TNC female connector. Hazardous tank level monitoring, offshore platforms, chemical processing, power plants…
- Read more
-
- Wifi Access Point
CCF2DX80 ATEX Enclosure data radio
- CCF2DX80 enclosure is used for data transmissions in hazardous area zone 1 gas.
- Read more
-
- Wifi Access Point
CCF5-AP1240G ATEX enclosure access point CISCO
- Type of protection: II 2 G Ex d IIB+H² Class of temperature: T6-T3 Protection degree: IP66 Ambient Temp: -20 / +40°C
- Read more
-
- Wifi Access Point
CISCO2700_3A – Access point enclosure 3 WIFI antennas 2.4GHz
- Type of protection: 2G Ex d IIB+H²Class of temperature: T6 – T3Protection degree: IP66Ambient Temp : -20/+40°CZones : 1-2
- Read more
-
- Wifi Access Point
CISCO2700_4A – Access point enclosure 4 WIFI antennas 5GHz Dual Band
- Type of protection: 2G Ex d IIB+H²Class of temperature: T6 – T3Protection degree: IP66Ambient Temp : -20/+40°CZones : 1-2
- Read more
-
- Wifi Access Point
CISCO3700_4A – Access point enclosure MIMO 4 WIFI antennas 2.4GHz
- Type of protection: 2G Ex d IIB+H²Class of temperature: T6 – T3Protection degree: IP66Ambient Temp : -20/+40°CZones : 1-2
- Read more
-
- Wifi Access Point
CISCO3700_4A – Access point enclosure MIMO 4 WIFI antennas 5GHz Dual Band
- Type of protection: 2G Ex d IIB+H²Class of temperature: T6 – T3Protection degree: IP66Ambient Temp : -20/+40°CZones : 1-2
- Read more
-
- Enclosures, Flameproof ex d
CPS IIC Enclosure with window
- Enclosure in light alloy with transparent part in thermoresistant toughened glass suitable for containing the electrical apparatuses of command, control, measure and regulation. External bolts and screws in stainless steel, RAL 2004 internal anticondensate coating and RAL 7000 external epoxy coating with embossed effect.
- Read more
-
- Microwave Detector, Security
CPS3/197DHF ATEX Microwave detector
- DatasheetDownload CPS3/197DHF ATEX microwave enclosure for to be used in severe environments where presence of gas, vapor, dust, fiber, in hazardous area. Optimal mounting height: 1.8 – 2.5m
- Read more
-
- Enclosures, Increased safety enclosures Ex e
CSA/X stainless steel without hinges
- The CSA / X enclosures are square or rectangular shape and they have a cover with gasket which is fastened to the body of the enclosures by screws.
- Read more
-
- Atex antennas
CTM Explosion-proof GPRS Antenna 2W
- The CTM-Series of antennas are designed for use in “Hazardous- Classified” and Industrial-Hardened applications. The antennas are omni-directional with 2.0 dBi gain and designed for flexible mounting with an M20 thread*. The mounting base is made of heavy nickelplated brass with an integrated TNC coaxial connector for ease of installation. The radome is optimized for rugged industrial applications while maintaining…
- Read more
-
- Atex antennas
CTM GPS Explosion-proof Antenna 2W
- Classified” and Industrial-Hardened applications. The antennas are omni-directional with 2.0 dBi gain and designed for flexible mounting with an M20 thread*. The mounting base is made of heavy nickelplated brass with an integrated TNC coaxial connector for ease of installation. The radome is optimized for rugged industrial applications while maintaining maximum radio frequency transmission and reception efficiency.
- Read more
-
- Atex antennas
CTM-1500-TF GPS Explosion-proof antenna
- The CTM-Series of antennas are designed for use in “Hazardous-Classified” and Industrial-Hardened applications. The antennas are omni-directional with 0.0 dBi gain and designed for flexible mounting with an M20 thread*. The mounting base is made of heavy nickelplated brass with an integrated TNC coaxial connector for ease of installation. The radome is optimized for rugged industrial applications while maintaining maximum…
- Read more
-
- Atex antennas
CTM-1600-TF Iridium satellite antenna
- The CTM-Series of antennas are designed for use in “Hazardous-Classified” and Industrial-Hardened applications. The antennas are omni-directional with 2.8 dBic gain and designed for flexible mounting with an M20 thread*. The mounting base is made of heavy nickelplated brass with an integrated TNC coaxial connector for ease of installation. The radome is optimized for rugged industrial applications while maintaining maximum…
- Read more
-
- Atex antennas
CTM-2402-TR / CTM-5000-TF Wi-Fi dual band explosion-proof antenna 2W
- The CTM-Series of antennas are designed for use in “Hazardous-Classified” and Industrial-Hardened applications. The antennas are omni-directional with 2.0 dBi gain and designed for flexible mounting with an M20 thread*. The mounting base is made of heavy nickelplated brass with an integrated TNC coaxial connector for ease of installation. The radome is optimized for rugged industrial applications while maintaining maximum…
- Read more
-
- Atex antennas
CTM-401-TF Explosion-proof Antenna 2W
- The CTM-Series of antennas are designed for use in “Hazardous- Classified” and Industrial-Hardened applications. The antennas are omni-directional with 0.0 dBi gain and designed for flexible mounting with an M20 thread*. The mounting base is made of heavy nickelplated brass with an integrated TNC coaxial connector for ease of installation. The radome is optimized for rugged industrial applications while maintaining…
- Read more
-
- Atex antennas
CTM. Explosion-proof antenna 2W
- The CTM-Series of antennas are designed for use in “Hazardous-Classified” and Industrial-Hardened applications. The antennas are omni-directional with 2.0 dBi gain and designed for flexible mounting with an M20 thread*. The mounting base is made of heavy nickelplated brass with an integrated TNC coaxial connector for ease of installation. The radome is optimized for rugged industrial applications while maintaining maximum…
- Read more
-
- Atex antennas
CTM. Explosion-proof antenna 2W
- The CTM-Series of antennas are designed for use in “Hazardous- Classified” and Industrial-Hardened applications. The antennas are omni-directional with 2.0 dBi gain and designed for flexible mounting with an M20 thread. The mounting base is made of heavy nickelplated brass with an integrated TNC coaxial connector for ease of installation. The radome is optimized for rugged industrial applications while maintaining…
- Read more
-
- Atex antennas
CTX. Explosion-proof antenna 2W
- The CTX-Series of antennas are designed for use in “Hazardous-Classified” and Industrial- Hardened applications. The antennas are omni-directional with 2.0 dBi gain and designed for flexible mounting on a variety of explosion proof housings or on ¾” pipe with a ¾” NPT pipe thread. The mounting base is made of heavy nickel-plated brass with an integrated TNC coaxial connector for…
- Read more
-
- Led, Lighting
CZ0264/20-LED3W-NM-80-KF-B Explosion-proof EXIT LED
- Explosion-proof EXIT LED ATEX & IECEx certified. Product with fuse or switch fitted non maintained.
- Read more
-
- Emergency exit light, Lighting
CZ0264/20-LED3W-NM-80-KF-B Explosion-proof EXIT LED
- Explosion-proof EXIT LED ATEX & IECEx certified. Product with fuse or switch fitted non maintained.
- Read more
-
- Accessories, Electrical Outlets
Decontactor DX1 20A
- Type of protection: II 2GD Ex de IIC; Td A21Class of temperature: T6-T5Protection degree: IP65
- Read more
-
- Accessories, Electrical Outlets
Decontactor DX2 200A
- Type of protection: II 2GD Ex de IIC; Td A21Classe of temperature: T6-T5Protection degree: IP65Certificate: LCIE Ex 07.001 / LCIE 04 ATEX
- Read more
-
- Accessories, Electrical Outlets
Decontactor DX3 32A
- Type of protection: II 2GD Ex de IIC; Td A21Classe of temperature: T6-T5Protection degree: IP65
- Read more
-
- Accessories, Electrical Outlets
Decontactor DX6 63A
- Type of protection: II 2GD Ex de IIC; Td A21Classe of temperature: T6-T5Protection degree: IP65
- Read more
-
- Accessories, Electrical Outlets
Decontactor DX9 125A
- Type of protection: II 2GD Ex de IIC; Td A21Classe of temperature: T6-T5Protection degree: IP65Certificate: LCIE Ex 07.001 / LCIE 04 ATEX
- Read more
-
- Accessories, Insect control
Divatex S 40
- Insect destroyer for explosive gas atmosphere. It attracts insects with UV lamps and traps adhesive sheet. For zones 1 and 21 (explosives zones per gas).DIVATEX S-40 effectively fight flying insects in this zones.
- Read more
-
- Accessories, Grounding
DMT14 Electronic earthing system
- Electronic Earthing System is composed of one IIB aluminium alloy enclosure (EJB 8A type) inside which there is an electronic resistance/capacity device and externally a support hook, an earthing clamp, complete with 8 m of cable, to measure and check the continuity towards the earth, aiming to eliminate the electrostatic charges. Enclosure has on the cover a green and a…
- Read more
-
- Radio Communications, Talkie Walkie
DP4401 Ex – ATEX VHF Portable radios
- Threats from explosive gas, combustible dust or chemical vapours, from an oil rig to an underground mine, your workers confront them daily. Safe, reliable communication is absolutely critical in such dangerous environments. That’s where the power and performance of MOTOTRBO digital radios stand out.
- Read more
-
- Enclosures, High voltage
DPJB Range
- The DPJB range offers an effective means of connecting cables or equipment up to a maximum of 11kV and is Fault rated to 50kA for 1 second. Cable conductor sizes of up to 630mm2 can be accommodated depending on the enclosure configuration and number of conductors.
- Read more
-
- HVAC, Ventilation
DUCT SO – Portable and adjustable axial fan
- Type of protection: II 2G or II 3G IIB T3Class of temperature: T3Ambient Temp: -20/+40°C
- Read more
-
- Accessories, Electrical Outlets
DXN 37C
- Type of protection: II2 G/D Ex e II tD A21Class of temperature: T6-T5Protection degree: IP 65
- Read more
-
- Accessories, Electrical Outlets
DXN1 20A
- Type of protection: II 2 GD EEx/ ed IIC DIP A21Class of temperature: T6-T5Protection degree: IP 66 / IP 67
- Read more
-
- Accessories, Electrical Outlets
DXN3 32A
- Type of protection: II 2 GD EEx/ ed IIC DIP A21Class of temperature: T6-T5Protection degree: IP 66 / IP 67
- Read more
-
- Accessories, Electrical Outlets
DXN6 63A
- Type of protection: II 2 GD EEx/ ed IIC DIP A21Class of temperature: T6-T5Protection degree: IP 66 / IP 67
- Read more
-
- Control Boxes
EFS Switch IIB / IIC
- Enclosure in light alloy with external bolts and screws in stainless steel. RAL 7000 external epoxyvinyl coating. Entries: 2x ¾” UNI6125 (supply with 1 cable gland + 1 plug) Max I = 20A (AC1) - 690 V a.c.
- Read more
-
- Enclosures, Flameproof ex d
EJB-W. Enclosure with display window
- The EJB enclosures with a display window are rectangular shaped and have the cover with flat joint which is fixed by hexagonal head screws. Standard powder epoxy painting, like RAL 7005. To contain terminals, contactors, switches, transformers, capacitors, PLC and other electric, electronic equipment and I.S. devices
- Read more
-
- Enclosures, Flameproof ex d
EJB/X. Stainless steel enclosure
- The EJB/X enclosures are rectangular shaped and have the cover with flat joint which is fixed by hexagonal head screws. To contain terminals, contactors, switches, transformers, capacitors, PLC and other electric, electronic equipments and I.S. devices.
- Read more
